• U9310010 - Emmeti LCD Touchscreen 7 Day Programmable Room Thermostat

Despite its simple and unobtrusive appearance, this LCD touchscreen 7 Day programmable digital thermostat is packed full of features.

It is an electronic digital touchscreen programmable thermostat with pre-connected on-off contacts for 230VAC operation. Large simple clear, backlit, display. Temperature differential 1oC. Flame icon in display provides calling for heat indicator.

It has an optional remote sensor which can be used either to sense air temperature remotely for use in bathrooms for example or to sense floor temperature where additional protection is required for the floor finish. The thermostat can be set to sense air temperature only, floor temperature only or air and floor temperature, switching off when either of the two set points is reached.

Programming allows four time / temperature events per day with a choice of 24 hour, 7-day or 5+2 day programming options.

Also has built-in frost protection set at 5oC, holiday programming, manual override features, pump exercise (15 seconds in 24 hours) and optimum start (self regulating) features included.

Features include:

  •     Extra large, backlit LCD display for clarity – 95mm x 55mm
  • Simple-to-use touchscreen interface with large, easy-to-read character size and extra-large touch keys for easy operation
  • 7 day/ 5+2 day or 24 hour programme setting options to suit wide range of end user needs
  • 2 x on-off periods per day and four temperature settings
  • Manual override and vacation mode
  • Frost protection function
Terminal rating 5A (inductive loads)

Installation Requirements

Please ensure that the electrical wiring of the installation and connections to and from the thermostat are in accordance with BS 7671, the latest edition of the IET Wiring Regulations.

The thermostats are designed for mounting on industry standard single-gang flush mounted wiring box with a minimum depth of 35mm. The backplate of the thermostat is secured to the mounting box after separating the front half from the backplate as shown below: the fixing centres of the backplate are also shown below.

The thermostats have been designed for fixed wiring only. Cable access is through the mounting box directly to the screwed connection terminals as shown in the Wiring section below.

The thermostat should be positioned about 1.5m from floor level and must not be positioned where it can be affected by draughts, sources of heat or cold or direct sunlight.

Write a review

Note: HTML is not translated!
    Bad           Good

U9310010 - Emmeti LCD Touchscreen 7 Day Programmable Room Thermostat

  • £70.86 excl VAT
  • £85.03 incl VAT